Safe to run a box fan face down?

Submitted ⁨⁨6⁩ ⁨days⁩ ago⁩ by ⁨nokturne213@sopuli.xyz⁩ to ⁨[deleted]⁩

My business has a swamp cooler (evaporative), but none of the windows open so I have no way to vent air. There is a vent in the alcove (?) over my front door facing downward. The vent is about the size of a box fan. I have been thinking about putting one face down on top of the vent.

If this is not a good idea is there a better option? I have an outlet not too far from the area, but do not think that there is anywhere near to hard wire. I could run a wire out the vent for a solar panel, but the awning is north west facing.

source

Comments

Sort:hotnew top

genuineparts@infosec.pub ⁨5⁩ ⁨days⁩ ago
Aside from premature failure, the actual answer to your question is: Yes. There are no inherent dangers to running a box fan face down.

source
fuzzy_tinker@lemmy.world ⁨6⁩ ⁨days⁩ ago
Box fan bearings are not typically designed to run in that orientation. It will probably run for a while before failing prematurely. Might make it a couple months or just a few weeks.

This is a much more robust fan and they come in various sizes to better fit your opening. They move a lot more air, and many styles come with a thermostat and speed controller. Sorry for the Amazon link, this is just the general style: a.co/d/bLeBCeD

source
- nokturne213@sopuli.xyz ⁨6⁩ ⁨days⁩ ago
  And that one will be okay laying to push air down?
  
  source
  - seathru@lemmy.sdf.org ⁨6⁩ ⁨days⁩ ago
    Anecdotal, but I ran a fan in that exact orientation for years with no issues. I used it for an overhead fan in a garage.
    
    source
  - fuzzy_tinker@lemmy.world ⁨5⁩ ⁨days⁩ ago
    The bearings are much sturdier as the fan is bolted to the motor, and the motor is a generic one meant to be used in any orientation. I personally bought [this](iLIVING 20" Wall Mounted Shutter… www.amazon.com/dp/B0BVY8VCNZ) one for my house to cool it in the summer and at half power, every open window in the house has a stiff breeze.
    
    source
    -> View More Comments
radix@lemmy.world ⁨6⁩ ⁨days⁩ ago
You could always build a plywood box/cube thing to duct the airflow downward, but with an opening on the side so you can use any cheap box fan.

source
- nokturne213@sopuli.xyz ⁨6⁩ ⁨days⁩ ago
  That has been a thought too.
  
  source
  - owenfromcanada@lemmy.ca ⁨5⁩ ⁨days⁩ ago
    If you don’t care how it looks, and you’re specifically blowing air in with the box fan, you can just use a large garbage bag to direct the air in. Mount the fan vertically facing the opening, cut open a trash bag, and attach it to the remaining three edges of the opening and your fan.
    
    If it’s stupid and it works, it’s not stupid.
    
    source
Brkdncr@lemmy.world ⁨6⁩ ⁨days⁩ ago
A vented security door would work better.

source
- nokturne213@sopuli.xyz ⁨6⁩ ⁨days⁩ ago
  It is an old building with odd sized everything, and I have to get the landlord’s approval for anything like that.
  
  source