Is this Samsung USB c adapter fake?

Comments

• cmnybo@discuss.tchncs.de ⁨6⁩ ⁨months⁩ ago

  It’s definitely cheaply built. There is no RFI filtering and they used a resistor as a fuse. At least it appears to have a decent amount of separation between the high and low voltage sides though.

  source
• ColdWater@lemmy.ca ⁨6⁩ ⁨months⁩ ago

  Image Image

  source
• mvirts@lemmy.world ⁨6⁩ ⁨months⁩ ago

  Did it cost an unreasonably small amount?

  Why did you take it apart?

  source

  • ColdWater@lemmy.ca ⁨6⁩ ⁨months⁩ ago

    30$, it’s dead that’s why I took it apart

    source

    • mvirts@lemmy.world ⁨6⁩ ⁨months⁩ ago

      Can’t find a teardown of that 60W charger, but it looks nothing like some of the Samsung ones posted in the teardowns here: www.chargerlab.com

      source
• asbestos@lemmy.world ⁨6⁩ ⁨months⁩ ago

  Absolutely is, no doubt about it

  source
• BearOfaTime@lemm.ee ⁨6⁩ ⁨months⁩ ago

  Isn’t that a heat sync?

  source

  • ColdWater@lemmy.ca ⁨6⁩ ⁨months⁩ ago

    No, there’s foam under it

    source

    • geography082@lemm.ee ⁨6⁩ ⁨months⁩ ago

      Heavier = good ?

      source

      • -> View More Comments
    • espentan@lemmy.world ⁨6⁩ ⁨months⁩ ago

      Foam, or a heat conductive pad?

      source

      • -> View More Comments
    • BearOfaTime@lemm.ee ⁨6⁩ ⁨months⁩ ago

      Interesting.

      source
• lemming741@lemmy.world ⁨6⁩ ⁨months⁩ ago

  I’ve never seen a premium brand charger that wasn’t absolutely stuffed with components on one side. They’re always trying to shrink them, and all that real estate on the board is wasted.

  source