Not that expensive to do it yourself. Getting a fish tape and a cheaper Ethernet termination kit would set you back at most $50. Only other tools you need is a drill and most homeowners should already have that. And a really long bit is cheap at harbour freight.
Even beyond renting, installing a wifi camera is SO much cheaper than running Ethernet all over your house. And if you need it run through an external wall? Even more money.
ThePantser@lemmy.world 3 months ago
sugar_in_your_tea@sh.itjust.works 3 months ago
Yup, cost isn’t the issue, time and patience are. In order to run cables down my walls, I’d need to wade through 2-3 feet of insulation fluff in my attic while stepping only on roof cross-beams, all with only like 7 feet of space at the center (way less at the edges). The cable and tools will only cost $100-200, but the whole process is a giant pain to actually do.
obinice@lemmy.world 3 months ago
Even beyond renting, installing a wifi camera is SO much cheaper than running Ethernet all over your house. And if you need it run through an external wall? Even more money.
A bit of plastic trunking, an ethernet cable, and a long masonry bit for your hammer drill to get through the brick wall, oh and a little sealant, not that expensive, I believe in you!
TragicNotCute@lemmy.world 3 months ago
I’m gonna fall through the ceiling :(
zecg@lemmy.world 3 months ago
That’s not cute, it’s tragic
cm0002@lemmy.world 3 months ago
Not if you DIY. I just finished a project, not only wiring all rooms for Ethernet, but PoE for 10 exterior cameras.
You can get 500ft Cat 5e boxes off eBay for like ~$20, an extra long 1/2 inch drill bit (for punching through the exterior wall) was like another 20. Most expensive part was probably the metal conduit for the outside runs (I decided to only have 2 or 3 holes to the outside and run the cables in the conduit along the soffit to converge to one of 3 exterior holes for final routing within the house. That was probably 150-250)
All in all after estimating for secondary costs, like screws, brackets, sealant, a caulk gun, ceiling bracket for ceiling routing indoors etc this project was probably <400, pretty cheap as far as home improvement projects go
hemmes@lemmy.world 3 months ago
You can save on all that conduit with direct burial Ethernet.
ShepherdPie@midwest.social 3 months ago
Do you really need either when you’re running the cable down the soffit where it’ll never really get exposed to sun or rain?
hemmes@lemmy.world 3 months ago
No - I use some standard stuff in areas like that, when I’m able to come right out and under the soffit or siding. If I have to make a run, closer to the ground, with a brick facade, I’ll use it. I won’t go crazy actually trying to burry it when it stays near my house hidden by shrubs.
I have buried it for customers that require connections located in dislocated structures - trenches and filling by others though. 😅