Comment on Sovol SV06 stringing issue
Fisch@discuss.tchncs.de 3 months agoI already tried increasing the retraction length but it didn’t help. I have it at 0.5 mm now and I read online that Sovol recommends not going above that. Someone else also recommended drying the filament, so I’m going to try that. I don’t know what the glassing temperature is but it’s PLA, do you know what a safe temperature would be?
morbidcactus@lemmy.ca 3 months ago
It’s going to depend on the brand, prusa recommends 45c I’ve done at 55 and while it printed fine, don’t recommend that, PLA has a fairly low glass transition temp and that was right on the low end of where that starts.
Fisch@discuss.tchncs.de 3 months ago
I’m gonna try it at the temperature and time prusa recommends then