A bit hard to tell, as every printer is different, but try a small test file at let’s say 100 mm/s? I use Cura (really, really dislike the Slic3r/Prusa Slicer/Orca interface) and here it’s called “Print Speed”. Changing that will lower the others in the same way, can’t imagine it works differently in Prusa Slicer.
Comment on Sovol SV06 stringing issue
Fisch@discuss.tchncs.de 3 months agoThe config I’m using has increased speed compared to the default settings. I heard about the cooling system too, I could try lowering the speed to see if it helps and if it does, I saw online that you can swap the fan for a bigger one. Which speeds would I have to lower, exactly?
Stampela@startrek.website 3 months ago
Fisch@discuss.tchncs.de 3 months ago
That speed is already faster than what my printer settings were. I have tested lower print speeds tho but it didn’t make a difference.
AtHeartEngineer@lemmy.world 3 months ago
Ya lowering the speed is a good thing to try. Also, you may have a very slight clog in the nozzle which can lead to weird behavior like stringing and under extrusion
Fisch@discuss.tchncs.de 3 months ago
How could I check if the nozzle is clogged?
AtHeartEngineer@lemmy.world 3 months ago
You could swap the nozzle, or do a cold pull. Honestly it would be a little challenging to explain that well over text, especially since I am not familiar with your specific printer (I’ve used and own a lot of them though). The best bet would be to look up on YouTube how to do a cold pull, or swap the nozzle. Some good YouTube channels are Teaching Tech, CNC Kitchen, and Made with Layers. Teaching Tech and made with layers are probably where you will find the best info for a beginner, but CNC Kitchen is 🔥