I spent a year tracking down random afci circuit breaker trips, until I realized it was my powerline Ethernet. Never again.
Comment on Networking Dilemma
poVoq@slrpnk.net 5 months ago
Power-line tends to be quite slow and error prone. If you have existing coax, that is likely the better option. You can get up to 2.5gbit adapters for it: til.simonwillison.net/…/ethernet-over-coaxial-cab…
Shadow@lemmy.ca 5 months ago
r00ty@kbin.life 5 months ago
I think people's experience with PLE will always be subjective. In the old flat we were in, where I needed it. It would drop connection all the time, it was unusable.
But I've had them run totally fine in other places. Noisy power supplies that aren't even in your place can cause problems. Any kind of impulse noise (bad contacts on an old style thermostat for example) and all kinds of other things can and will interfere with it.
Wifi is always a compromise too. But, I guess if wiring direct is not an option, the OP needs to choose their compromise.
MystikIncarnate@lemmy.ca 5 months ago
IMO, powerline is going to depend on a lot of factors including what kind of power you use, which varies from country to country. Where I am in North America, we use 240v split phase, and the powerline adapters are 120v (half phase), so if one unit ends up on one side of the phase, and one ends up on the other side of the phase, you’re going to have a bad time, if it links at all… So knowing which “side” of the split phase your powerline is on becomes critical, which is not something most people know about their power situation. As a result, it’s basically a crap shoot whether it will work well or not.
brygphilomena@lemmy.world 4 months ago
Most power line adaptors say to keep it on the same circuit. The one I have is running a small VoIP phone and I don’t have issues with call quality.
MystikIncarnate@lemmy.ca 4 months ago
Yep, I’m sure they do.
Realistically, does any average consumer know what’s on which circuit?
Spanning the split phase will screw you up, across breakers won’t be fun but shouldn’t pose any serious problems, as long as it’s not in different sides of the split phase.
I’m pretty sure they say this because actually explaining what will work and what won’t either requires significant prior knowledge of power systems, or a couple of paragraphs of explainers before you can get a rough picture of what the hell they’re driving at.
Everyone I know who has used powerline, just plug it in and see if it works. Those who were lucky, say it’s great and works without issue, etc. Those who were not lucky say the opposite.
I’m just over here watching the fireworks, eating popcorn.