Comment on First time ever installing a water heater, or doing any plumbing...

altima_neo@lemmy.zip ⁨1⁩ ⁨year⁩ ago

• AnotherPerson@lemmy.world ⁨1⁩ ⁨year⁩ ago

  What’s an expansion tank? I set it up like the old one was set up. Oh I did was disconnect the old one and reconnect the new one to the same pipes coming out of the wall.

  source

  • rockSlayer@lemmy.world ⁨1⁩ ⁨year⁩ ago

    An expansion tank is necessary for water heaters, because the process of heating water causes it to expand. Without a reserve tank, pressure could build to unsafe levels

    source

    • SpeakinTelnet@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

      All tanks are equipped with a safety release for the pressure and the only time when that delta in pressure can be problematic is when you go from completely cold to hot due to the higher amount of water that can fit in the tank at lower temp.

      Otherwise I’ve never seen a house in Canada with an extension tank attached to the water heater and the water come in ice cold in the winter.

      source
    • falsem@kbin.social ⁨1⁩ ⁨year⁩ ago

      Pressure won't build up, it will be let out by the pressure relief valve and make a mess on the floor. Which is also undesirable.

      source

      • SheeEttin@lemmy.world ⁨1⁩ ⁨year⁩ ago

        Well, right up until the pressure relief valve fails. Whether it fails open or closed, you’re gonna have a bad time, because either way you’re probably going to have a lot of water where there’s not supposed to be water.

        source
    • AnotherPerson@lemmy.world ⁨1⁩ ⁨year⁩ ago

      If it’s necessary then how did my last tank make it 20 years without one?

      source

      • Rixonomic@lemmy.world ⁨2⁩ ⁨months⁩ ago

        The expansion tank isn’t just for the water heater. That increased pressure puts undue strain on the entire plumbing system in your home. It will cause toilet fill valves to fail, supply lines to rupture, and possibly even pinhole leaks. A lot of plumbing issues are solved by installing an expansion tank.

        source
      • rockSlayer@lemmy.world ⁨1⁩ ⁨year⁩ ago

        Honestly, I don’t know, I’m not a plumber. There are a couple possibilities, including that it was built into the water heater or the relief valve did it’s thing. Some water heaters don’t need expansion tanks at all, either. It’s generally a “just in case” thing, since the right failures in the wrong way could lead to a hot water bomb going off in your house.

        source

        • -> View More Comments
    • AnotherPerson@lemmy.world ⁨1⁩ ⁨year⁩ ago

      In reading it looks like it is for homes newer than 1986? Our old water heater was 20 years old and we never had any issues with the pressure getting to high.

      source