Comment on What should I run and why?

• Bronzie@sh.itjust.works ⁨6⁩ ⁨months⁩ ago

  Itk’s a fair response.
  Some uf us aren’t flush with time.

  I’d survive SSH for installing Portainer and then you can run most of it from its GUI. If you use Docker Compose it will be super easy to make changes to your setup as well. Just change the file and redeploy your badboys.

  I’m a recent dad absolutely strapped for time, but I still managed to set up a headless Debian server with close to zero Linux knowledge. There are so many amazing guides out there, especially on GitHub.

  Good luck whatever you go for.

  source
• AbouBenAdhem@lemmy.world ⁨6⁩ ⁨months⁩ ago

  You can use any port for SSH—or you can use something like Cockpit with a browser-based terminal instead of SSH.

  source
• hedgehog@ttrpg.network ⁨6⁩ ⁨months⁩ ago

  I am trying to avoid having to having an open port 22

  If you’re working locally you don’t need an open port.

  If you’re on a different machine but on the same network, you don’t need to expose port 22 via your router’s firewall. If you use key-based auth and disable password-based auth then this is even safer.

  If you want access remotely, then you still don’t have to expose port 22 as long as you have a vpn set up.

  That said, you don’t need to use a terminal to manage your docker containers. I use Portainer to manage all but my core containers - Traefik, Authelia, and Portainer itself - which are all part of a single docker compose file. Portainer stacks accept docker compose files so adding and configuring applications is straightforward.

  I’ve configured around 50 apps on my server using Docker Compose with Portainer but have only needed to modify the Dockerfile itself once, and that was because I was trying to do something that the original maintainer didn’t support.

  Now, if you’re satisfied with what’s available and with how much you can configure it without using Docker, then it’s fine to avoid it. I’m just trying to say that it’s pretty straightforward if you focus on just understanding the important parts, mainly:

  • docker compose
  • docker networks
  • docker volumes

  If you decide to go that route, I recommend TechnoTim’s tutorials on Youtube. I personally found them helpful, at least.

  source

  • Antaeus@lemmy.world ⁨6⁩ ⁨months⁩ ago

    Thank you for your input. It is very appreciated. I will take a look at TechnoTim.

    source