I’ve never understood why this isn’t the responsibility of the utility to prevent back feeding at the meter when the grid is down.
Comment on Germany just now approved new laws that make setting up solar on your balcony super easy
Rentlar@lemmy.ca 6 months agoThe important thing on backfeeding is that utility workers will need to isolate at more points before working, otherwise they will get injured by backfeeding/battery systems if they run on infrastructure they are working on.
Cort@lemmy.world 6 months ago
Diplomjodler3@lemmy.world 6 months ago
Those regulations were made when solar power simply wasn’t a thing. Upgrading an entire grid takes time. But of course, the utilities would rather lobby against change than actually get off their butts.
barsoap@lemm.ee 6 months ago
Network operators and electricity sales are decoupled EU-wide, meaning that the network operator doesn’t really care if you feed in energy because they’re not selling you any anyway. They’re just operating the network, getting paid by whoever uses it. They care about the stability of the network but those solar inverters stabilise the frequency it so it’s actually a net positive for them.
Of course, your municipality might have sold off its utility and now you’re dealing with private sharks who invest nothing and just bleed everything dry. Or you’re dealing with a CDU council and major who hate renewables because it’s what the greens want.
Rentlar@lemmy.ca 6 months ago
It’s a good question but say they want to bring power back up to the neighbourhood as quickly as possible, and they would have to go to each house and shut off each connection which would take a while even if it were accessible outside without needing to inform the property owners. One residential transformer usually serves from 1 to 15 or so households. Many transformers are on one branch that extends from a substation. So depending on where they isolate, just one customer out of hundreds can backfeed which can make the entire branch dangerous to work, since normally it is all expected to be off on the other side. Putting the responsibility on the utility to isolate every downstream point is time consuming and just extends blackouts. However if they were to isolate smaller sections up and downstream it might make it easier.
Cort@lemmy.world 6 months ago
I think I was more advocating for automatic switching at the meters when grid power isn’t sensed at the meter. The same type of sensing that goes into larger solar inverters to prevent back feeding during power outages today. 20-40+ years ago your argument about having to go home to home manually shutting off connections would have made sense, but these days technology is advanced far enough that it can be done automatically without human intervention, as soon as the grid goes down. Then brought back up when grid power returns.
Rentlar@lemmy.ca 6 months ago
I think those technologies are the reason why it’s easier for government to permit small personal solar installations now compared to before.
With generators it’s harder to trust everyone that might have one.
MisterD@lemmy.ca 6 months ago
Should not be an issue. The inverters that feed into the grid need to follow the phase and frequency of the grid. If the grid is down, there is nothing to follow and it will not feed any power into the grid.
exocrinous@startrek.website 6 months ago
Hey, I learned this the other day from Practical Engineering!
Rentlar@lemmy.ca 6 months ago
I think an approved set of solar panels and inverters will be able to streamline the process for sure and help quell concerns of electrical worker and grid safety.