No one should ever need to cut into your walls. A good tech will run down from attic or up from crawl space. The most you should ever have is a new plate where a box may be placed. If someone is cutting frivolously into your walls they should be fired. Hopefully they had contractors insurance too. Probably not if they were that incompetent.
Yep. With the solid walls I have, if you’re not chasing into the plaster/brick, you’re putting trunking on the outside (which looks pretty awful, imho).
I’ve run mine under the floorboards. CAT6e flat-band cables with multiple redundant outlets. Not a great solution in a finished house, but when redoing the floors, it’s great. From room to room just drill through the wall below the floor level and pop the cable through. I’ve crimped mine myself so the hole is literally tiny, but even for a regular connector you don’t need all that big a hole.
In case I ever need to replace them, I hope I’ll be able to attach a new one to the old cable and just pull it through slowly.
Entertainmeonly@lemmy.blahaj.zone 4 months ago
No one should ever need to cut into your walls. A good tech will run down from attic or up from crawl space. The most you should ever have is a new plate where a box may be placed. If someone is cutting frivolously into your walls they should be fired. Hopefully they had contractors insurance too. Probably not if they were that incompetent.
InformalTrifle@lemmy.world 4 months ago
That’s a bit of a blanket statement. It depends on the house and where you want the cable to go.
GreatAlbatross@feddit.uk 4 months ago
Yep. With the solid walls I have, if you’re not chasing into the plaster/brick, you’re putting trunking on the outside (which looks pretty awful, imho).
papertowels@lemmy.one 4 months ago
cries in flat roof and slab foundation
viking@infosec.pub 4 months ago
I’ve run mine under the floorboards. CAT6e flat-band cables with multiple redundant outlets. Not a great solution in a finished house, but when redoing the floors, it’s great. From room to room just drill through the wall below the floor level and pop the cable through. I’ve crimped mine myself so the hole is literally tiny, but even for a regular connector you don’t need all that big a hole.
In case I ever need to replace them, I hope I’ll be able to attach a new one to the old cable and just pull it through slowly.