I am in deed printing with Pla but it sticks waaaay too well onto the surface
Comment on Can too good adhesion be countered by lower bed temps?
rambos@lemm.ee 8 months agoAdhesion can be better, but it also acts as a release agent. If you are printing PETG on glass always use glue, for PLA it shouldnt be needed.
cosmicrookie@lemmy.world 8 months ago
rambos@lemm.ee 8 months ago
In my experience PLA just pops off the clean glass when cooled to room temp (holds extremely well if bed is at 45C or more). I have some tips, but only to improve adhesion xD You can maybe try less squish on the first layer (lower flow rate or increase nozzle distance a bit) or just use thin layer of glue. Too low or too high bed temp can ruin bed adhesion, but feels like wrong approach imo, still worth a try
thisbenzingring@lemmy.sdf.org 8 months ago
glue or hairspray