Comment on Super Mario Warp Pipe tv remote holder
j4k3@lemmy.world 1 year ago
This would be a good one to sand and polish if you are ever inclined. All filaments can be polished. PLA is only second best to ABS/ASA in my experience. PLA will hold a shine that is about the same texture as factory Lego bricks.
TwanHE@lemmy.world 1 year ago
Abs/Asa can also be lightly sanded and then vapor smoothed.
j4k3@lemmy.world 1 year ago
They are very different processes. Vapor smoothing is more of a hack than anything. It traps the solvent in the part for a very long time. Like using acetone on auto body trim and bumpers that are mostly ABS will get you fired from any shop. It will bleed and ruin the top coat an clear coat as it vents from underneath them. In my testing, acetone greatly alters the structural strength as well. Polishing maintains or in some cases improves the mechanical performance of parts. Even for cosmetics, the polished part will look like it was injection molded while the inconsistency and rounded corners of vapor smoothing look very DIY. Polishing can be done poorly, and I am an actual finishing pro, so YRMV.
TwanHE@lemmy.world 1 year ago
Luckily the part doesn’t have to be clearcoated and it actually has minimal impact on part strenght if you limit the exposure time