Comment on NY bill would require a criminal history background check for the purchase of a 3D printer

• nomecks@lemmy.world ⁨11⁩ ⁨months⁩ ago

  You can make a completely 3D printed gun that will survive at least one shot. I’m sure if you’re using resin or carbon fiber reinforced plastic so you could probably get more than one shot off.

  source

  • Piecemakers3Dprints@lemmy.world ⁨11⁩ ⁨months⁩ ago

    Resin is generally more brittle than filament, FYI, and the real question with most 3D-printed firearms is whether the shooter survives “at least one shot”.

    source

    • FireTower@lemmy.world ⁨11⁩ ⁨months⁩ ago

      Most 3d printed guns are either redesigns of existing guns replacing non pressure bearing parts with printed parts (look up FMDA17 a 3D printed Glock 17 equivalent) or mostly printed with pressure bearing parts being barstock or pipes (see FGC-9).

      source

      • Piecemakers3Dprints@lemmy.world ⁨11⁩ ⁨months⁩ ago

        I’m not really sure where you’re getting “Most 3D-printed guns”, but here’s one of the top communities of such. You’ll see quite clearly that MSLA is not the preferred method for production, parts or otherwise.

        source

        • -> View More Comments
  • kent_eh@lemmy.ca ⁨11⁩ ⁨months⁩ ago

    That may usually survive that one shot.

    Or it may fail and cause damage to the person foolish enough to be weilding it.

    source
• pushECX@lemmy.world ⁨11⁩ ⁨months⁩ ago

  Receivers are already regulated

  source

  • Bernie_Sandals@lemmy.world ⁨11⁩ ⁨months⁩ ago

    Receivers are usually the main part that’s 3d Printed, that’s the problem.

    source