Comment on Why prime tower instead of poop?
papalonian@lemmy.world 2 weeks agoThat’s why I suggested testing it and seeing the results for yourself, not necessarily “turn it off and yolo”.
If you know firsthand what the outcome of changing the settings is, you can make a decision on your own based on your own experience when to use what settings.
Blue_Morpho@lemmy.world 2 weeks ago
Testing on a print means nothing. Just because one print works doesn’t mean it will work on every print. If I understood exactly why there is a prime tower instead of purging for prime I’d know under what conditions it could be disabled.
Maybe it’s a historical artifact from printers from 10 years ago. Maybe “build nozzle pressure” doesn’t work as well if you aren’t priming onto a surface that would create back pressure.
papalonian@lemmy.world 2 weeks ago
I’m sorry, maybe I’m not phrasing this correctly…
I never said, “test on one print”. I said to test it. Test it on an object with many color changes, test it on a model with a ton of one color and only a small amount of another, test it with different infill percentages, test it on a prototype of something that’s going to be really important so you know how it will work in the end.
Everybody is going to have their own specific answer as to what works well and what is and isn’t necessary, the only way to find the right answer for you is to test things and figure it out yourself. The only way to get things 100% right 100% of the time is leave it how it is now and stop messing with it. Anything beyond that is going to vary on a case by case basis, and you’ll only understand what settings to change when, if you toy around with test prints.
I have been printing for many years. I understand that, “what works on one won’t always work on another”. Which is why I find it odd that you seem to be looking for an answer that works for one person, and therefore must work for every person, for every print. The only one-size-fits-all is going to be the most wasteful in material and time (purge tower and purging filament). If you want to cut back on what the manufacturer/ slicer devs are saying “this will most likely work”, you’re going to have to do some experimenting yourself.
Blue_Morpho@lemmy.world 2 weeks ago
Without knowing why, I would be wasting time. I could be changing colors when the problem is an acceleration condition created by a part shape causing underextrusion.
The entire point of this forum is to gain knowledge that you don’t already. Instead of answering any questions, you could just respond “Test it yourself.”
I’m not asking what works but WHY a feature exists. Understanding why allows you to design parts correctly from the start instead of screwing around and then randomly getting a good result that you don’t understand and therefore can’t replicate under all conditions.