Crank down on that back left corner a little more and rerun this test to see if you can get it under a 0.2mm range for the height difference. Since you’ve moved the printer off the table and on to the floor it may have altered things so you’ll want to redo it anyway (and any other time you physically move the printer).
nieceandtows@programming.dev 4 days ago
I ran the built in leveling and input shaping self test last night, and often run calibration before print
CmdrShepard49@sh.itjust.works 4 days ago
Crank down on that back left corner a little more and rerun this test to see if you can get it under a 0.2mm range for the height difference. Since you’ve moved the printer off the table and on to the floor it may have altered things so you’ll want to redo it anyway (and any other time you physically move the printer).
cosmicrookie@lemmy.world 4 days ago
Ok. I am not familiar with self leveling so wouldn’t know if it’s enough. But maybe it just needs a good cleaning with alcohol?