Acktually, this is a decent last resort if you have an alkaline battery leak all over a PCB. Hot water is probably not a good idea as you run the risk of warping a board.
A tooth brush and an isopropyl bath is probably a better option unless you have a good ultrasonic cleaner.
kryptonianCodeMonkey@lemmy.world 3 weeks ago
I clean all my electronics in the dishwasher.
Clinicallydepressedpoochie@lemmy.world 3 weeks ago
Duh, that makes so much sense!
remotelove@lemmy.ca 3 weeks ago
Acktually, this is a decent last resort if you have an alkaline battery leak all over a PCB. Hot water is probably not a good idea as you run the risk of warping a board.
A tooth brush and an isopropyl bath is probably a better option unless you have a good ultrasonic cleaner.