Comment

Comment on 'Botched insulation means mushrooms grow on my walls'

manualoverride@lemmy.world ⁨1⁩ ⁨month⁩ ago

I know a lot about building and insulation. The most likely cause of this is pre-existing damp that was just exasperated by the insulation making it warm on top of the damp.

If there is any sign of “rising damp” the modern way of dealing with it is by installing a layer of DryRods, however if the insulation was installed during a particularly dry period there might not have been evidence of a pre-existing problem.

Other than that possibility it could be an unrelated pipe leak, physical damage to the insulation and render, or an issue with the guttering.

Finally cold-bridging where a portion of the envelope of the house is I insulated and forms condensation, this is pretty much the only issue which could be a mistake on behalf of installer, but even then it should be obvious and made worse by failing to open windows or turn on extractors when showering, drying washing or cooking.

Any of this information could have been in the article, it’s absence is suspicious. Whatever the reason the first thing you need to do is let the contractor investigate.

source

Sort:hotnew top

FarceOfWill@infosec.pub ⁨1⁩ ⁨month⁩ ago
I agree but I can see why someone might not want to invite the people they feel ruined their home back to have another go.

source
- manualoverride@lemmy.world ⁨1⁩ ⁨month⁩ ago
  I agree, but then articles like this are the reason these people are so annoyed at the installers, they make it sound like there are mysterious procedures and practices which are not being followed, while failing to detail any of them and making the problem worse.
  
  Anyone reading this will only ever come to the conclusion that they had a bad installer and won’t want their help, all while their house is turning into a stroganoff.
  
  source
GreatAlbatross@feddit.uk ⁨1⁩ ⁨month⁩ ago
There is another thing that I sometimes talk about on here, breathability.
You either need to prevent any moisture moving in any direction, or allow vapor to move with breathable materials.
Ones that allow water vapor to move, but not liquid water.

Older buildings, where the original materials were breathable, should ideally continue to use breathable materials. This prevents issues with water wicking through one old surface, then getting trapped behind another. It also removes the risk of damaged or badly designed vapor barriers allowing things through, as the materials themselves help get the moisture out as a passive action.

source
- manualoverride@lemmy.world ⁨1⁩ ⁨month⁩ ago
  I’m not aware of any insulation and rendering options that allow breathability of the sub structure. This is why any internal leaks need to be fixed and rising damp needs to be mitigated with DryRods.
  
  Pretty much the only buildings that cannot be insulated without a massive amount of work is where the floor of the building is sitting in groundwater without a waterproofing membrane.
  
  source
  - GreatAlbatross@feddit.uk ⁨5⁩ ⁨weeks⁩ ago
    I like to think of it like a passive action that helps handle the smaller amounts of moisture (humans breathing, cooking, laundry), but also an action that helps reduce the problems of acute issues that occur. That way, when something does happen, there is at least a dampening effect while the leak is fixed.
    Leaks and rising damp still need to be addressed, obviously.
    
    Examples are things like vermiculite render on the outside, Steico/Wool batts as normal insulation.
    
    The downside is, it’s expensive. The insulation is only as good as fibreglass/rockwool, and costs about 3x as much.
    
    source