Comment

Comment on Toilet specific plungers get the job done faster and with way less effort and mess.

Mouselemming@sh.itjust.works ⁨3⁩ ⁨weeks⁩ ago

My new toilet doesn’t fit either of the above shapes, but a “Beehive” plunger works great.

www.korky.com/parts/…/beehive-max-toilet-plunger

The toilet also flushed really well and hasn’t gotten plugged up even once yet, but I made sure to have one that would work as soon as the toilet was ready to use.

source

Sort:hotnew top

Varyk@sh.itjust.works ⁨3⁩ ⁨weeks⁩ ago
What’s different between the beehive flange and the toilet plunger flange? they look the same.

or perhaps I should ask what shape is your toilet?

source
- Winged_Hussar@lemmy.world ⁨3⁩ ⁨weeks⁩ ago
  (USA) - I had the same issue as the user above - due to high edficiency toilet. The opening is more rectangular/ elongated than a normal toilet’s circular opening.
  
  source
- Wizard_Pope@lemmy.world ⁨3⁩ ⁨weeks⁩ ago
  I now just imagine them having a hexagonal toilet.
  
  source
  - Varyk@sh.itjust.works ⁨3⁩ ⁨weeks⁩ ago
    Hahaha, this must be it.
    
    source
- Mouselemming@sh.itjust.works ⁨3⁩ ⁨weeks⁩ ago
  Here’s the toilet, though the pics aren’t helpful. The exit hole is recessed backwards and squareish, with a wide channel. The flange doesn’t sit properly inside it, and the circumference of the bell is too small. With the beehive the circumference is wider, and it just sort of smothers the whole area, a pums the water through its center hole, which has nowhere to go but into the exit. Like, it’s not anything precise, it would probably work great in a “normal” toilet just as well because it just fills whatever space there is.
  
  source
stoly@lemmy.world ⁨3⁩ ⁨weeks⁩ ago
Why did a regular one not fit?

source
- Mouselemming@sh.itjust.works ⁨3⁩ ⁨weeks⁩ ago
  Basically, it’s shaped weird and won’t make a seal. It’s a WaterSense toilet that flushes very efficiently with 1.6 liters, with an unusual configuration of input/output under the water. Almost like a channel from front(ish) to back. If you try to use a plunger like those pictured, part of the channel isn’t covered, so you just push water back out into the bowl. Good thing I was trying it with a clean new toilet! The wide deep beehive shape lays rubber all into the space, pushing the water down into the exit hole.
  
  source