mrquallzin@pie.eyeofthestorm.place
@mrquallzin@pie.eyeofthestorm.place@pie.eyeofthestorm.place
- Comment on Weird first layer issue. 1 week ago:
From a layman perspective, it’s infill. It’s filling in the space between the walls. Saying it’s the bottom shell layer with a monotonic pattern doesn’t add anything to the situation
- Comment on Weird first layer issue. 1 week ago:
Only on the infill. The walls are smushed so hard they’re transparent
- Comment on please recommend a simple selfhosted photo gallery 3 weeks ago:
You’re likely not going to find something so simple and lightweight. Immich has some setup, but if you want a good gallery that’s the way to go. Don’t be afraid of the learning.
- Comment on What the humidity level in your area? 5 weeks ago:
I just finished out some PLA spools I’ve had for a couple years now. They’ve sat in the open with no drying. Humidity sits in the mid 40s generally right now.
- Comment on Back with an update on my previous posts 2 months ago:
Anyone using the CC1 or CC2 should hop into the Open Centauri discord. The OC firmware is a better working version of the stock firmware, and we’re also developing Cosmos, for full Klipper control (Now alpha testing with the Canvas!)