faebudo
@faebudo@infosec.pub
- Comment on I design and 3D Printed the smallest friction hing, I think is possible at 10mm 1 week ago:
You might be able to make it much stiffer by adding more of the arms parallel. The force should be consistent when you tighten multiple of them with one screw.
- Comment on Prusaslicer: Auto Arrange, You Have Literally One Job 3 months ago:
Make the movements visible in preview. Most probably it makes the total movement shorter when switching between parts.
- Comment on 3d printed jig for assembling LED cube layers 5 months ago:
Lower speed between the holes because of low acceleration. Because of this more heat is brought into the layer which makes it more shiny. Your nozzle doesn’t reach the same speed on a 20mm line as it does on a 200mm line.
- Comment on Ender 3 V3 is listed on creality.cn 7 months ago:
Is it only me or does that CoreXZ kinematic not make any sense? They gain the ability to move in Z in high speed but add ringing etc. in Z direction.
- Comment on sandblaster? 9 months ago:
Prints can be scraped using microplane cards (can be made yourself from spring steel with a hammer). I really like this method as it leaves a smooth surface.
Explanation: m.youtube.com/watch?v=a4e9JJkinvk