vladmech
@vladmech@lemmy.world
- Comment on ‘So immoral’: gig economy workers forced to pay fee to receive their wages 3 weeks ago:
Woosh
- Comment on Magnus Carlsen: Chess champion quits FIDE tournament after being told to change jeans 5 weeks ago:
Assholes trying to gatekeep the poors from their hobbies.
- Comment on Super Duper DND Playlist Compendium 5 weeks ago:
This is fantastic, thank you so much for sharing it!
- Comment on [Opinion] Why do so many cozy games suck? 4 months ago:
This looks fun! Going to have to check that demo out when I get home.
- Comment on [Opinion] Why do so many cozy games suck? 4 months ago:
Any link/info on your game? I’m down for a cozy game with a bit more core gameplay
- Comment on Sonos considers relaunching its old app 5 months ago:
They really should. The longer this junk is out the more likely I am to sell my speakers and find a less jank solution.
- Comment on Signal under fire for storing encryption keys in plaintext on desktop app 6 months ago:
It doesn’t have gif searching though which is so annoying.
- Comment on Hades II is now available in Steam Early Access! 8 months ago:
Whelp, this decided my evening plans for me!
- Comment on Elon Musk goes ‘absolutely hard core’ in another round of Tesla layoffs 9 months ago:
We had a 3 and even though Musk was already an asshole idiot, we ended up swapping it out for a Y instead of another EV because the network is leaps and bounds ahead of everyone else. If they screw this up + keep opening it up to other manufacturers (which they should, that’s a good thing) I don’t see anyone our next cars being a Tesla.
- Comment on Helldivers 2 patch makes life hellish indeed for smaller parties, but also makes maps more fun to explore 9 months ago:
It sounds like it’s the recharge, not the fire. So still 3 seconds to charge, but then you have to wait an additional 5 seconds after firing before it’s ready again.
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Unfortunately I have the date on the top (which comes out great at least) but this thread has given me a lot of things to try!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
It’s a one month old printer so I hope it wouldn’t have that, but it’s so nice looking compared to my previous printer that I hadn’t thought about the fact it could have manufacture defects…
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Interesting, I haven’t heard of using chamfers before, that’s a cool addition, I’ll look into that!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Awesome, thank you! Giving this a watch!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
This is such ridiculously good and interesting information, thank you so much! I know what I’m going to be going through and testing the heck out of this weekend haha
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Do you have any recommendations for tuning filament? I’ve found a few videos I’m going to watch tonight, but one thing that’s interesting is I just switched from a CR-10 to a K1 Max, and at the same time from Simplify3D to Creality Print and checking my old S3D profile, my flow modifier was at 1.0, but on CPrint it’s at 0.95. That seems weird, but also it’s manufacturer software with their printer so I’d assume they know what they’re doing, but then it gives weird prints like this.
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Checking this out now, thank you!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Yeah no you’re right and I appreciate you bringing it up. Talked about it with my wife and had an additional “is this even a nice ‘magic moment’ if it’s shilling a store?” Going to go back to blank backs and just have a little card to hand out if folks specifically ask!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Would it seem less weird to you if it was an Etsy link or just creepy regardless?
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Hmm that’s a good point I hadn’t thought about, I’ll have to think on this a bit more but also in general want to get it cleaned up for future projects.
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
In theory no only because there are a ton of things like this on Etsy, but that’s something to think (worry) about haha
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Oh 100% yeah. Only doing this for the ones my wife is handing out and even then I’d prefer they look nicer as it reflects on me. The top side has the date on it and that thankfully consistently comes out fine!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Yeah I just moved to a K1 Max and have auto leveling for the first time, and the five batches that varied were from the same bed location so I’ll go through and make sure everything is tightened up, thank you for the idea!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
So it wouldn’t be indented really, just kind of there so drawn into the bottom layer? I’ll give that a try and see how that looks!
- Comment on Trying to add text to the bottom of prints and the quality is inconsistent 10 months ago:
Back to back prints so that may play into it, good point! Haven’t used it for a day so I’m kicking off a calibration and then printing a five batch to see how that looks.
For consistent preheating are you meaning like preheat the bed and hot end and then run the calibration? I just moved to a K1 Max from a CR-10 that I paper leveled so I’m very new to auto leveling and tricks for that. Thank you for the feedback!
- Submitted 10 months ago to 3dprinting@lemmy.world | 34 comments
- Comment on Any recommendations for refillable PLA filament? 11 months ago:
I’ll check this out, thanks! Going to be printing a lot of terrain soon so easier painting is always nice
- Comment on Any recommendations for refillable PLA filament? 11 months ago:
The latter, yeah! My BIL got a Bamboo and they have an unspooled program that looks nice but if you’re not on their subscription it’s a bit pricer. I’ll check out Filaments.ca, thank you!
- Submitted 11 months ago to 3dprinting@lemmy.world | 13 comments
- Comment on Reddit started doing what they always wanted to do, sell user content to AI. 11 months ago:
The only use I have for Reddit anymore is for super niche information. For example we were planning to go to Six Flags Discovery Kingdom today but it’s going to rain this afternoon. I checked their site and it said they were open 11-6, my BIL checked their app and at 11:30 it said they were currently closed. Found a Reddit post from someone confirming the park was closed for the weekend, and we didn’t waste a trip up. (as an extra annoying aside, apparently this information was posted on Six Flag’s Instagram page, because expecting a huge company to maintain a website is I guess just too much when they can offload it to social media.)
