The plug side that goes into the PSU is not standard.
The PSU is an EVGA 1600 G2 supernova.
How do I plug this in? I can’t find a compatible cable or plug adapter.
I have a 220 volt outlet, my PSU supports 115-240v, but the plug is only a standard 120v plug. How doninokug it in?
Submitted 1 year ago by average650@lemmy.world to selfhosted@lemmy.world
notfromhere@lemmy.one 1 year ago
There should be a switch that flips the input between 110/220 and you will need a different cable for the PSU
ptz@dubvee.org 1 year ago
Will that work for US split-phase “220” where the voltage is 110v on each leg? I was always worried that would fry the PSU since it’s not true 220V.
KrombopulosMikl@lemmynsfw.com 1 year ago
Yep
i_am_not_a_robot@discuss.tchncs.de 1 year ago
It’s not? I guess it’s more like 230-240 but it should be fine,
average650@lemmy.world 1 year ago
Right, where do I find the cable? I can’t find it on evgas website or anywhere else.
notfromhere@lemmy.one 1 year ago
Can you upload a picture of the plug because it should be easy to find standard cables?