Decibel meter app?

Submitted ⁨⁨2⁩ ⁨days⁩ ago⁩ by ⁨klu9@lemmy.ca⁩ to ⁨askandroid@lemdro.id⁩

I have a problem with noisy neighbours and want an app to measure and record the volume of their noise for possible legal action.

I prefer free-libre from F-Droid, but they don’t have one.

Google Play has… hundreds of apps (one at US$100!). No idea which to choose, hopefully a free one without ads and data surveillance.

Web search results filled with sites I don’t know/trust, and obvious SEO or AI slop.

So I’m asking folks here: anyone have any experience of a decibel meter app that’s:

preferably free-libre
free-gratis (I might pay for a reasonably-priced pro version after I’ve tried out the free one)
zero or tolerable ads
zero or minial data surveillance

Thanks.

source

Comments

Sort:hotnew top

fuckwit_mcbumcrumble@lemmy.dbzer0.com ⁨2⁩ ⁨days⁩ ago
Just FYI those apps are not going to be accurate at all. All devices have different microphones in different layouts and none of them are alike. For relative comparisons like X is louder than Y they’re fine. But don’t expect 33 dbm to actually be 33 dbm.

source
- klu9@lemmy.ca ⁨2⁩ ⁨days⁩ ago
  Thanks for the info.
  
  So, imperfect but perhaps one might help at least for comparing noise levels, e.g. the noise they’re making now compared to last night.
  
  source
  - avidamoeba@lemmy.ca ⁨2⁩ ⁨days⁩ ago
    At levels that don’t exceed much over 80dB. If you’re relying on it to tell whether your hearing is safe in a club, it isn’t safe. 😂
    
    source
BlastboomStrice@mander.xyz ⁨2⁩ ⁨days⁩ ago
How about Phyphox? Open-source, on fdroid:)

source
- klu9@lemmy.ca ⁨2⁩ ⁨days⁩ ago
  Thanks. I’ve installed it and looking at it now.
  
  The experiment I need would be… Acoustic Amplitude, right?
  
  And the steps would be? (sorry, I’m not very scientific)
  
  “Calibrate” tab > “Calibrate”: do this when there is no/little noise?
  
  “Calibrate” tab > “Offset”: no idea what to do here.
  
  “Amplitude” tab > press the play button?
  
  “Amplitude” tab > press the pause button?
  
  Then, other? 3-dot menu > “Export data” or “Share screenshot”?
  
  source
  - BlastboomStrice@mander.xyz ⁨2⁩ ⁨days⁩ ago
    Yo, you’re kind of on the correct path. I think though it probably wont work for you if you dont have a sound amplitute tool already (I know, counter intuitive).
    
    Step1: for this to work, you need to be in a room where you have a device producing a sound of a certain loudness, use a sound loudness measuring tool and then put that value in the calibration field. By pressing calibrate it will calculate the offset, how far off the current reading of the app is from the actual value, and then it will try to take this into account when measuring sounds (and display the proper values).
    
    Step2: Here you’d put the offset if you already knew it (if you had done step1 in the past for example). Since you haven’t, you’d have to do step1 instead of step2.
    
    Step3: yes
    
    Step4: yes
    
    Step5: I’d do both probably. Export data either as csv (comma separated values file) or as excel file and I’d also export a screenshot of the graph.
    
    To conclude, you need a sound measuring tool, a constant sound source (like a phone playing a specific frequency at a certain volume) and a somewhat quiet place to avoid any interference. If you know anyone who could lend you their sound measuring tool to do a calibration it could help. Otherwise, there are cheap sound meters (maybe some Uni-T ones?).
    
    PS. Even if the readings are correct though, I dont know if they could be considered as evidence, you’d might have to check that first.
    
    source
    -> View More Comments

olebla@feddit.org ⁨2⁩ ⁨days⁩ ago

Try phyphox, its made by a the german RWTH Aachen University. f-droid.org/packages/de.rwth_aachen.phyphox

source

klu9@lemmy.ca ⁨2⁩ ⁨days⁩ ago

Thanks. I’ve installed it and looking at it now.

The experiment I need would be… Acoustic Amplitude, right?

And the steps would be? (sorry, I’m not very scientific)

“Calibrate” tab > “Calibrate”: do this when there is no/little noise?
“Calibrate” tab > “Offset”: no idea what to do here.
“Amplitude” tab > when there is noise I want to measure, press the play button?
“Amplitude” tab > after a bit, press the pause button?
Then, other? 3-dot menu > “Export data” or “Share screenshot”?

source