Submitted 2 months ago by akilou@sh.itjust.works to 3dprinting@lemmy.world
I’d like to get a Bambu Labs A1 with the AMS but I’ll want a sturdy surface to put it on. I’m shopping around for tables with drawers and I’d like to know how big it needs to be. There are dimensions for the printer itself but it’s hard to know how much more space I need to accommodate the AMS.
22 cm wide? This graphic for the A1 Mini says the whole setup is 60 cm. Minus the 38 cm mini would mean it’s 22 yeah?
You can also mount the AMS on the top bar of the A1
That sound like it would wobble and easily tip over, no?
I top-mounted it to my A1-mini and it does just fine. I’d imagine the full A1 should be alright.
It’s a wobbly affair but it does work and Bambu does offer it as an option with a mounting bracket you can print. I… just put my AMS to the side because my table is already kinda scuffed :D
Sphks@lemmy.dbzer0.com 2 months ago
It’s a mess. I have the A1 with AMS and it takes way more space than I wanted. The coreX with AMS are way more compact.
akilou@sh.itjust.works 2 months ago
It needs 70 cm of depth?! Damn, I don’t have room for that. I’ll have to rethink this.
Sphks@lemmy.dbzer0.com 2 months ago
The bed goes back and forth. On the back, you need the place since there is the infamous cable that should not be torn. On the front, the bed can go over the void. There is no need for a 70 cm large table, maybe 50cm with overhang.