In the space of mini PCs/NUCs, this does seem comparable. But bear in mind that the entire space of “home server” is a lot bigger than NUCs. After all, not everyone just wants to host an NVMe drive or two; they might want to fit some cheaper SATA SSDs or even spinning rust, as part of a cascade of stroage, with caching on SSDs and other nice things.

Likewise, the dual LAN ports with 802.3bz support is nice, but the reality is that most networks are only 1 Gbps with some devices supporting 2.5 Gbps. Quite frankly, for server use that actually needs one or both port’s bandwidth, the link would likely be better served with SFP+ slots, because of better compatibility with cheap enterprise switches available online, and because SFP+ transceivers run less hot than their twisted pair counterparts at 10 Gbps. Heck, you could even use a 40 Gbps QSFP+ NIC, which only requires a x8 or X4 PCIe slot (depending on PCIe generation of the NIC). On that note, a single PCIe slot is nice, but it does preclude the use of a double-wide GPU for transcoding use.

I would sum all this up as lacking expandability. Yes, it can be expanded somewhat. But for folks that want the capacity of an ATX-based build, this ain’t it. It certainly checks off a lot of people’s boxes, yours included, but that doesn’t mean that people are “sleeping on” this, because at the end of the day, if it doesn’t serve their purposes, it’s not the right box for them.

Also, as of this writing, only the 32 GB RAM variant is available on the USA website.