Comment on How would you fill these gaps?
dack@lemmy.world 1 year ago
I’d probably go with some sort of split cover plate/flange (or a regular non-split one if you can disconnect it to feed it through). If you have access to a 3D printer, you can make one that way pretty easily. If not, you can probably find one at the hardware store or online that would work.
Hazdaz@lemmy.world 1 year ago
Yeah definitely use a flanged cover plate but if this goes to an exterior wall, hit the hole with some expanding foam first. Let it dry and then cut the foam flush. Then use the flanged cover.
AnotherPerson@lemmy.world 1 year ago
It’s from a garage to an interior wall. I’m not sure if that would qualify as exterior or not.
Starb3an@sh.itjust.works 1 year ago
I consider “exterior” to mean one side of the wall is air conditioned/heated, and the other side is not. Therefore, an exterior wall has insulation in it. An interior wall is generally hollow.
Hazdaz@lemmy.world 1 year ago
I’d use some expanding foam if you could feel the air from the other side or see through it. You could also fill that area with silicone (which could also be used to help hold the flanged cover too.