Comment on Building DIY a smart doorbell but would appreciate some help with the power and wiring
Jimbabwe@lemmy.world 6 months agoAwesome, thank you both. This is more complicated than I thought, so on the plus side I don’t feel as dumb as before.
Maybe i’ll just ditch the dinky chime I have and setup some alert automations or something. In that case, I could just connect the two chime wires to create a closed loop, then replace the transformer with a 120vac outlet plug, plug in a generic 120va -> 5vdc power supply, chop the two output wires from the power supply and connect them to the existing doorbell wires. And violá, 5vdc delivered right to the front door? Is this plan insane?
Limonene@lemmy.world 6 months ago
Actually, I think that’s a really good idea. Just be aware of possible inductance in the long wires from the transformer area going to the camera. Putting a large electrolytic capacitor next to the camera should fix that.
As for your bell, there are dead simple systems that use a battery-powered stick-on button with a transmitter, and a chime/receiver that plugs into a wall. If you want to be fancy, you could find a way to power the transmitter with that 5VDC, in parallel with the camera… or you could just keep it simple and use the battery that comes with the button. They last near forever.
Jimbabwe@lemmy.world 6 months ago
Awesome. You and @ch00f@lemmy.world are true OGs. Thanks (again)!