Comment on Secondary Lager Fermentation Slow?
plactagonic@sopuli.xyz 6 months ago
Lager styles usually take longer in secondary leave it at least week to pressurize.
Which yeasts did you use?
Comment on Secondary Lager Fermentation Slow?
plactagonic@sopuli.xyz 6 months ago
Lager styles usually take longer in secondary leave it at least week to pressurize.
Which yeasts did you use?
Aarkon@feddit.de 6 months ago
Classic: W-34/70 lager yeast. I waited quite some time though to assure primary fermentation was really over in order not to burst any bottles. So it’s also entirely possible that there is just very little yeast in the individual bottles to get secondary fermentation going.
Can’t wait to start kegging…
plactagonic@sopuli.xyz 6 months ago
I brewed in about the same style but mainly with S-185. If you measure gravity during fermentation you can put it in bottles with ~4,5°Bx and skipp adding sugar.
It is enough to pressurize it and fermentation isn’t completely stopped (it is just slowing down). After week in 10 - 12°C it should be pressurized.
When I miss this window I add only about 3.5 g of sugar per bottle and 30g per 30l keg.
Aarkon@feddit.de 6 months ago
I’m not convinced the particular yeast strains make that much of a difference here. How did you measure your gravity though, what tool did you use & did you correct for alcohol? 4.5° is somewhere between my corrected and uncorrected readings. For the last three days, I read 5,9°Bx / 1.024 g with a refractometer, which Brewfather converted to 2.3° Bx / 1.009 final gravity when taking the fermentation into account. Your way, I’d have had to start secondary fermentation way earlier to leave some sugar behind. Doesn’t sound like a bad idea though, saves just another bit of work and only needs me to get the timing right (and have reliable measurements of course).
plactagonic@sopuli.xyz 6 months ago
I use hydrometer it gives you real gravity but you need more beer.
But when you calculate real gravity from refractometer you can use it.
The window for this method is from 4-4.5°Bx and I only used hydrometer so it may need little bit of trying to not get bombs.
Now I work in brewery and we use basically the same method, but because the tank caps work as regulated pressure relief valves, they are cooled… It is just more regulated and done before packaging (bottling and kegging).