Comment

Here are two before and one after. Lower left = top layer over extrusion, but the bottom was fine. Lower right = that’s only 2-3 layers in total, but since it was way too close to the bed it was rippling like crazy. The cube = hot off the press and looking pretty good.

Image

I didn’t take any fixed photos of the hot end, but this page has a number of pictures showing what it should look like (look at the three screws if you didn’t see them sticking out in my earlier picture).

source

Sort:hotnew top

jimmydoreisalefty@lemmy.world ⁨6⁩ ⁨months⁩ ago
Wow, great picture!

Thanks for the link, I did a quick comparsion of your pic and the one in the link:

Image

Thank you for taking the time to show us your print problems and explaining!

source
- IMALlama@lemmy.world ⁨6⁩ ⁨months⁩ ago
  Happy to help! For a little more context on the pictures: the hot end is available with blue and black anodizing. I have the black version (mostly because that was what was in stock). In my photo, the back silicone sock has been removed. Here’s a better photo, also from the linked page. I’ve circled the three screws I’m talking about.
  
  Image
  
  source
  - jimmydoreisalefty@lemmy.world ⁨6⁩ ⁨months⁩ ago
    Ah, I knew I was missing something in the picture!
    
    Thank you for pointing that out!
    
    source