Comment

That’s a nice little board! Web search SIM7600X finds various code you can use. Idk if asterisk can support it directly though.

Another possibility might be to use a consumer mobile phone I guess.

I wonder if there might be a 5g version of the board sometime.

source

Sort:hotnew top

TheHolm@aussie.zone ⁨8⁩ ⁨months⁩ ago
Very strange line from specs. USB Driver Windows XP/7/8/10/11, Linux (driver free on Raspberry Pi Raspbian system) Does it mean binary blob driver only? and you need to pay for it to use it on PC?

source
- solrize@lemmy.world ⁨8⁩ ⁨months⁩ ago
  I think it means that on Linux, no driver is needed (“driver-free” = free of drivers) since it uses the kernel USB stack. On windows there may be a USB driver that gets loaded. But you’re right, it’s ambiguous.
  
  source
- SpicyAnt@mander.xyz ⁨8⁩ ⁨months⁩ ago
  Yeah, it is written funny. But what it means is that the Linux kernel already comes pre-packaged with the drivers necessary to communicate using the protocol used by this device (UART). These Linux drivers (and by extension Raspbian) are natively capable of interfacing via the GPIO pins or via the USB connectors. It is not true that the device is “driver free” as you always need a driver for this, what they meant is that it is not necessary to install any additional drivers for Linux. So “free from installation” I suppose.
  
  Windows does not come pre-packaged with these drivers, so you need to install them if you want to interface with the device via USB. The chip that the board uses for the UART -> USB conversion is the CP2102. This chip is a common chip used in some ESP32 boards, and I think it would work fine with the standard CP210x driver. But on their site they do provide a specific driver for free (SIMCOM_Windows_USB_Drivers_V1.0.2.exe)
  
  source
SpicyAnt@mander.xyz ⁨8⁩ ⁨months⁩ ago
I agree, it looks like a nice board!

But… after ordering it I noticed that while the pictures in the website show the “SIM7600G-H” chip - which supports global GSM and LTE bands - the text description specifies that the chip included in the kit is the “SIM7600CE-T”, which supports the Chinese bands. I am not sure I will get the correct version now 😅 But there are many other “SIM7600G-H” modules and USB dongles available out there, and from what I have found this chip is a nice option for GSM/LTE projects.

source
- solrize@lemmy.world ⁨8⁩ ⁨months⁩ ago
  There’s a device called cell2jack that converts your mobile phone to a pseudo landline. It talks to the cell phone by Bluetooth and has an rj11 port that you plug a landline phone into.
  
  I wonder if one can do similar with software on a raspberry pi. That is, use Bluetooth and a mobile phone instead of that board. It’s clunkier but everyone has old phones around, that have the right bands etc.
  
  source
  - SpicyAnt@mander.xyz ⁨8⁩ ⁨months⁩ ago
    Thanks, I will look into those.
    
    Is there a reason you don’t want to just use a SIP service by the way? It would certainly be cheaper than that board plus a mobile plan.
    
    At the moment I am using a SIP service - at least I think I am. Is JMP.chat a SIP service? It works to a degree for me but there are many drawbacks. I can’t get a number from my country, many services recognize and block the phone number as a VoIP phone (for example, telegram), and I have to trust an additional intermediary to get my unencrypted SMS and 2FA codes. I do trust the service providers to a reasonably high degree, but I don’t think it is wise to associate their numbers with sensitive accounts such as my bank account.
    
    The VoIP idea is not the reason why I began playing with these boards in the first place, though. It is an idea that I thought of while playing with these modules. And I don’t use mobile plans. I use sim cards that I can top up when needed, so the cost is about $5 every 6 months or so for the home base, and about ~$5 a month for the data I use for my mobile router. The reason why I want to control the device through the raspberry pi is that then I also have more fine-grained control over the top-up process and I “own” my phone number without an additional intermediary.
    
    source
    solrize@lemmy.world ⁨8⁩ ⁨months⁩ ago
    I see, yeah, reasonable point about some services not liking hosted phone numbers. I haven’t had serious problems with that, but it is a thing.
    
    If you can use those sims in mobile phones then it’s call them mobile plans. Can I ask what country you are in? Here in the US, mobile service costs a lot more. I have been getting SIP service from vitelity.net but twilio.com and voip.ms are better known here. I don’t know about jmp.chat.
    
    I haven’t had trouble using a hosted number for banking and it feels better to me than using a mobile number. The cheap mobile providers (MVNO’s) I use here are sketchy, mobile numbers change all the time, etc. I use a VoIP number as my permanent stable number and forward it to my mobile. So if I switch mobiles, I just change the forwarding. In theory you can port phone numbers between carriers but I’ve had significant hassle doing that. That’s just here though. It may be different where you are.
    
    source
    -> View More Comments
- SpicyAnt@mander.xyz ⁨8⁩ ⁨months⁩ ago
  The board finally arrived and it is indeed the SIM7600G-H, which is the global version.
  
  I tried it on my raspberry pi 5 and struggled a bit because there was a change to the UART interface between the PI 4 and PI 5 and the documentation on this board describes the PI 4. But, after some fiddling around I figured out the correct setting and got it to work. The main difference is that the “UART0” needs to be explicitly turned on because the default debugging UART now uses the UART10 interface that is somewhere else on the board.
  
  source