Comment

Comment on Stuttering when printing PETG

It still happens with low temps that are in PLA range. I tried a temp tower starting from 220°C, so the upper end of PLA temps, and it still happens. I can print PLA with 220°C without stuttering, so I don’t think it’s a power issue.

source

Sort:hotnew top

rambos@lemm.ee ⁨9⁩ ⁨months⁩ ago
I dont use pruca slicer, but had simmilar issues with ArcWelder plugin in Cura. Disable plugins if you use any and maybe try another slicer for testing

source
seasick@lemmy.world ⁨9⁩ ⁨months⁩ ago
Did printing with PETG ever work with your printer?

You could create two gcode files for the same model, one for PLA and one for PETG and see if something stands out in their difference.

source
- DreadPotato@sopuli.xyz ⁨9⁩ ⁨months⁩ ago
  
  Did printing with PETG ever work with your printer?
  
  I have done a few prints in PETG before, only 2 or 3, but they didn’t have the issue.
  
  You could create two gcode files for the same model, one for PLA and one for PETG and see if something stands out in their difference.
  
  Yeah I was planning on trying this when I get home.
  
  source