Comment

damium@programming.dev ⁨10⁩ ⁨months⁩ ago

You might also try running a few leveling probes in a row to check the repeatability of the measurements. It’s possible that something is messing with the ability to make good measurements (unstable power feed, heat warp, probe binding, etc).

source

Sort:hotnew top

xzot746@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
I’ll give that a go. Thanks for the idea.

source
- rug_burn@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
  Would seem odd, but if it seems like your leveling wheels are backing off, maybe the threads are worn on them? It would suck to replace them only to find out that wasn’t the issue though, but if you have a spare set / originals if you’ve upgraded, maybe see if those are more stable?
  
  source
  - xzot746@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
    I have aluminum wheels in place if the original, they seem to be staying tight, but maybe not.
    
    I did notice that the plastic heater wire retainer is deforming in the middle, so maybe that is contributing, I will put a larger washer on it when I reassemble the unit.
    
    Thanks for the comment.
    
    source