Comment on Wi-Fi 7 Signals the Industry’s New Priority: Stability

• binomialchicken@lemmy.blahaj.zone ⁨8⁩ ⁨months⁩ ago

  Is fiber really worth the extra complexity and expense? It’s strength is in longer distances with mostly straight runs. When you are doing short distances with multiple turns, copper is much easier and more forgiving. Splicing fiber is difficult if something breaks during or after installation, on top of the expense and skill needed for proper termination. Tools and hardware for copper are cheap, easy to use, and ubiquitous.

  source

  • pearsaltchocolatebar@discuss.online ⁨8⁩ ⁨months⁩ ago

    It really isn’t any more complex, and the price of it has dropped significantly. Plus, you don’t have to terminate the fiber, just pull it.

    source

    • foggenbooty@lemmy.world ⁨8⁩ ⁨months⁩ ago

      I’m still not sure I see the need for it with copper twisted pair now being able to do over 10Gbps reliably. However I can’t fault you for future proofing. I always say pull the best copper you can, and extra of it since it’s easier to do all at once than again later.

      source
  • Chriswild@lemmy.world ⁨8⁩ ⁨months⁩ ago

    I agree and really you can replace the copper with fiber by tying an end and pulling.

    source
• Trollception@lemmy.world ⁨8⁩ ⁨months⁩ ago

  Why would you drop fiber when you can do 10gbps on ethernet at the distances most cabling would be in a home. Never would consider to run fiber and I just finished a couple of new cat7 drops in my home.

  source

  • pearsaltchocolatebar@discuss.online ⁨8⁩ ⁨months⁩ ago

    Future proofing. Fiber is cheap, so why not?

    source
• sugar_in_your_tea@sh.itjust.works ⁨8⁩ ⁨months⁩ ago

  My city is rolling out fiber in a year or two, so I’ll have to ask them how that works, because I’d like to plan out where they drop it.

  source

  • Trollception@lemmy.world ⁨8⁩ ⁨months⁩ ago

    They don’t drop it in your home most likely. In our home it’s a box on the side of the house with the modem and they ran cat5 to our media panel in the garage.

    source

    • sugar_in_your_tea@sh.itjust.works ⁨8⁩ ⁨months⁩ ago

      Ours will support >1gbit (up to 10gbit allegedly), so they probably won’t run cat5, but hopefully they don’t get lazy and just run cat6 or cat6a and actually run a fiber link to the house.

      source

      • Zeroc00l@sh.itjust.works ⁨8⁩ ⁨months⁩ ago

        All the ONT boxes I’ve seen in houses have fiber directly to the box.

        source