Comment on What can I do with an old laptop?

• Sethayy@sh.itjust.works ⁨6⁩ ⁨months⁩ ago

  Depends on the device, but on devices like android no.

  I can’t say I’ve gone through with it myself, but in theory you could have a host somewhere connected to a VPN that you send a your tailscale traffic through as an exit node

  source
• habitualTartare@lemmy.world ⁨6⁩ ⁨months⁩ ago

  On Android and I believe IOS it’s a single connection. I would start with the basic functionality (also don’t create a tailscale account with GitHub bc it does weird things with sharing if you ever want to have multiple users).

  Once you’ve got the VPN and storage working I can think of two options to give you the functionality of 2 vpns

  1. tasker is an android app that can let you automate a lot. It might let you switch vpns when opening say your storage app and switch back a bit easier than toggling it in settings.
  2. setup your lap-server at home with an outgoing public VPN so traffic goes mobile device> tailscale> public VPN. Essentially acting like you’re home using your public VPN. This may take some tinkering to work properly, especially when you’re home on the same network. Plus you would definitely see a Network speed impact on your phone.

  source
• LunchEnjoyer@lemmy.world ⁨6⁩ ⁨months⁩ ago

  Tailscale and Mullvad VPN recently partnered up to solve this exact issue. So in the admin panel of tailscale you could set up a device as an exitnode and then have that run through one of Mullvads servers. It’s all very neat and simple 😊

  source

  • BearOfaTime@lemm.ee ⁨6⁩ ⁨months⁩ ago

    Exit nodes KICK ASS.

    Makes it so my RPi enables me to manage any device on my home network from anywhere. I can print from my laptop or phone to my home printer. No need for a Tailscale client on hardware devices.

    source
  • driveway@lemmy.zip ⁨6⁩ ⁨months⁩ ago

    That sounds awesome.

    source
• AtariDump@lemmy.world ⁨6⁩ ⁨months⁩ ago

  Why would you be?

  source

  • BearOfaTime@lemm.ee ⁨6⁩ ⁨months⁩ ago

    Generally Tailscale uses an app on every device to be a member of the Tailscale Virtual Mesh network.

    Though by using the Funnel, Serve, and Subnet Router features you can access things without the Tailscale client app.

    source
• Bluefruit@lemmy.world ⁨6⁩ ⁨months⁩ ago

  That i can’t say. Id imagine no at least on android.

  If you dont mind the extra setup, cloudflare tunnels are awesome. developers.cloudflare.com/…/connect-networks/

  I prefer this over tailscale as i dont want to have an app i need to access my server.

  source

  • BearOfaTime@lemm.ee ⁨6⁩ ⁨months⁩ ago

    Tailscale only requires one app install, on a device in your network.

    That device can be configued as a subnet router (providing local network access to Tailscale connections).

    Then using either the Funnel or Serve option, remote devices can access your Tailnet without a client installed.

    Just an option, another way of achieving similar results (though with different capabilities) as Cloudflare.

    source

    • Bluefruit@lemmy.world ⁨5⁩ ⁨months⁩ ago

      The more you know! Do you know any guides that go over this? I’d be interested in setting this up.

      source