I print mainly in abs and petg, my enclosed mk3s+ is more sensitive than my voron in the cold as it has a lower wattage heated bed and the panels are thinish plexi vs the aluminum composite on the voron (still would be better if I insulated). I’m in southern Ontario so it’s not crazy cold but it’s usually sub -10c for a good chunk of the winter, a small space heater is enough to bring my garage to 10-15c if I’m going to be working out there, but it’s often enough to just use the space heater to boost the enclosure to that temp, both of them can keep the enclosures above 30-40c in the winter, I’ve never had issue with warping due to enclosure temps, usually adhesion due to residual oils on the build plate.

With a proper environment control, probably have even less issues, temp stability in my experience matters the most, longer soaks are my normal practice in the winter just to ensure I hit a good equilibrium and try to get around and thermal expansion issues.