Comment

Comment on Need help setting up local SSL certificates?

citizen@sh.itjust.works ⁨10⁩ ⁨months⁩ ago

Can you elaborate more on what is not working? What are you testing to conclude it’s not working? From my understanding you’re running VPS server. You have tunnel setup to connect to the server. You’re trying to setup N.P.M. with let’s encrypt certs validating via DNS.

To continue troubleshooting you should eliminate all network paths and test from the VPS (ssh to the system). Once you have NPM setup you should be able to test certificate locally connecting to NPM exposed port. Assuming you exposed port 443

openssl s_client -connect 127.0.0.1:443 -showcerts

If you can validate that NPM is serving endpoint with the correct certificate you can move on to troubleshooting your network path.

source

Sort:hotnew top

dataprolet@lemmy.dbzer0.com ⁨9⁩ ⁨months⁩ ago
I should have added that I am also using Pi-hole and Unbound. This seems to be the issue. I now added the following to my unbound.conf but it’s still not working unfortunately. Where domain.duckdns.org is my domain by DuckDNS and the IP points to the Nginx Proxy Manager.

local-zone: "domain.duckdns.org." static local-data: "domain.duckdns.org. IN A 192.168.178.123"
source
dataprolet@lemmy.dbzer0.com ⁨10⁩ ⁨months⁩ ago
So I’ve followed the tutorial, added a wildcard certificate and tried to add a proxy host using the DuckDNS domain to point to NPM itself. When I open the mydomain.duckdns.org I get an error that I can’t connect to the site.

Besides that NPM is working and I easily set up my actual domain and it’s resolving to devices in my home network. For example cloud.myactualdomain.com is resolving to my Nextcloud running on a Raspi with a local IP with a valid SSL certificate. So NPM and the WireGuard tunnel are generally working as intended.

On which system should I try the openssl command and what’s the port?

source
- citizen@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
  It’s not clear what’s the purpose of NPM in your case. Do you want to serve internal network or expose to Internet. If it’s the latter, you need to see what interface you exposed NPM port on (have to be your public network - VPS IP), your firewall needs to allow incoming connections on that port. Most likely you will be using port 443 and maybe 80 for redirect (checkbox in NPM always use TLS).
  
  OpenSSL command needs to be executed from VPS to eliminate network issues and just validate certificate setup. The IP and port would depend on what port you exposed. 127.0.0.1 should work from that context. Once you see certificate you can execute openssl command from your local and use WireGuard tunnel IP to connect to service. This is for internal network.
  
  source
  - dataprolet@lemmy.dbzer0.com ⁨10⁩ ⁨months⁩ ago
    NPM should serve as both, but only issuing SSL certificates for my local network is the issue. Have you taken a look at the tutorial I’ve linked in the original post?
    
    source
    citizen@sh.itjust.works ⁨10⁩ ⁨months⁩ ago
    Yeah I looked at tutorial. Port 81 is only for management (NPM admin gui). Then you have your traffic ports for proxy services. Those would be 80 and 443 normally. You would need to expose those ports to the Internet if you want to access NPM/proxy your service. Port 81 shouldn’t be exposed on your public interface make sure it isn’t or at least have firewall rule to allow only local network (ideally management network/vlan)
    
    source
    -> View More Comments
- Tywele@lemmy.dbzer0.com ⁨10⁩ ⁨months⁩ ago
  I think I had the same problem not so long ago. Every proxy host was working except NPM itself. My problem was that I just entered the wrong IP for the proxy host. I had to enter localhost or 127.0.0.1 to get it to work and everything else was like the tutorial you linked (I followed the same one)
  
  source
  - dataprolet@lemmy.dbzer0.com ⁨10⁩ ⁨months⁩ ago
    Thanks but no local proxy host is working.
    
    source