Comment

Comment on My Print won't stick to the Bed

DABDA@lemmy.world ⁨11⁩ ⁨months⁩ ago

I have no personal experience with a failed firmware update but a quick search returned forum.sovol3d.com/t/…/1452 and “solved” = forum.sovol3d.com/t/…/52

Seems like for some people it was ultimately the sd card being faulty that was causing the failure, especially if it was the sd card included with the printer.

Good luck!

source

Sort:hotnew top

Roflmasterbigpimp@lemmy.world ⁨11⁩ ⁨months⁩ ago
Thank you for your help! I’ve now set up a VM with Ubuntu and used a different FlashCard to safe it to. And now he is working again!

source
- DABDA@lemmy.world ⁨11⁩ ⁨months⁩ ago
  Awesome, glad to hear it!
  
  When you’re ready to try printing again I agree with the suggestions to:
  
  lower the bed temp to ~60c
  
  avoid using glue sticks or similar since it shouldn’t be necessary with PLA, and will just add another variable
  
  keep working through first layer print tests
  
  I’m surprised you’re having adhesion problems with a PEI build plate. When I swapped to PEI it was like magic; filament effortlessly sticks and finished prints pop off from a gentle flex. There isn’t like a plastic shipping cover on it or something is there?
  
  Anyway, good luck with the rest of your troubleshooting – I’m sure you’ll eventually get it dialed in :)
  
  source
Roflmasterbigpimp@lemmy.world ⁨11⁩ ⁨months⁩ ago
Huh. Yeah I used the SD Card that Came with the Printer.

source