Comment on My Print won't stick to the Bed

• Wutchilli@feddit.de ⁨10⁩ ⁨months⁩ ago

  Two questions: how high is the nozzle away from the printbed when you Print the First layer and have you done a Testprint to check the bedlevel

  source

  • Roflmasterbigpimp@lemmy.world ⁨10⁩ ⁨months⁩ ago

    I’ve printed a Benchy which worked very well. And the Nozzle is almost touching the Bed. The Manual sad if I can barely shove a Piece of A4 Paper between Nozzle and Bed that would be fine so I did that

    source

    • Wutchilli@feddit.de ⁨10⁩ ⁨months⁩ ago

      Maybe you can Print something Like this First layer Test (printables.com/…/252059-perfect-first-layer-test) so we can get a closer Look at your First layer

      source

      • Roflmasterbigpimp@lemmy.world ⁨10⁩ ⁨months⁩ ago

        Ive actually started another attempt with lower speed and I “loosend” the PLA from the Coil so it can be passed down more easily. If that fails I will print this test. Thank you :D

        source