Comment on My Print won't stick to the Bed
Wutchilli@feddit.de 7 months ago
Have you leveld the bed allready, it needs to have the right distance to the nozzle everywhere.
Comment on My Print won't stick to the Bed
Wutchilli@feddit.de 7 months ago
Have you leveld the bed allready, it needs to have the right distance to the nozzle everywhere.
Roflmasterbigpimp@lemmy.world 7 months ago
I’ve used the auto leveling, so I guess it is leveled(?)
Wutchilli@feddit.de 7 months ago
Two questions: how high is the nozzle away from the printbed when you Print the First layer and have you done a Testprint to check the bedlevel
Roflmasterbigpimp@lemmy.world 7 months ago
I’ve printed a Benchy which worked very well. And the Nozzle is almost touching the Bed. The Manual sad if I can barely shove a Piece of A4 Paper between Nozzle and Bed that would be fine so I did that
Wutchilli@feddit.de 7 months ago
Maybe you can Print something Like this First layer Test (printables.com/…/252059-perfect-first-layer-test) so we can get a closer Look at your First layer