Comment on Strings in holes?
SzethFriendOfNimi@lemmy.world 1 year ago
What do you see in the preview in the slicer?
I bet those are movements across one part of the print to the other and for some reason it isn’t retracting enough before the movements.
Although you’d see some heavy stringing on a retraction tower test most likely if it’s that bad.
PixeIOrange@feddit.de 1 year ago
Image
Nope, it should be walls. They just wont stick. How does wipe during infill work? cant find anything in cura or google. I try changing the wall order now, thanks for the tip, could work.
SzethFriendOfNimi@lemmy.world 1 year ago
Looks at the movement preview. See how the nozzle moves at those layers. But as another said those could be “fake” bridges added to allow sharp overhangs
PixeIOrange@feddit.de 1 year ago
Its just printing the walls, nothing unxpected. I changed the wall order like suggested in another comment and hope for the best.
CmdrShepard@lemmy.one 1 year ago
Try the “combing” setting “with infill” should drag the nozzle across the infill to wipe any strings away. Be careful with this though as I’ve had it knock prints loose from the bed. This print looks to have a large adhesion surface so it shouldn’t be an issue.