Comment on Can I plug Nevermore filter where I circled?
chrischryse@lemmy.world 11 months agoNot sure how familiar you are with electronic stuff, but the fans I have are 24v and 0.1A my laptop charger outputs up to 6A that shouldn’t be an issue right?
FuglyDuck@lemmy.world 11 months ago
Volts need to match, nominally.
Your fans will only draw .1A from the supply- as long as your supply has enough amperage to supply everything running… your fine.
chrischryse@lemmy.world 11 months ago
So I should be fine if my charger ranges from 19-24V? Or does it need to only be 24v?
CmdrShepard@lemmy.one 11 months ago
With a fan it won’t be a big deal if the charger outputs 19-24V. Do you have a multimeter? Do you have a 24V source anywhere on the board? Using a laptop charger for 24V/0.1A is just way overkill. It’ll work just fine though. You might also get some 24V LEDs to run off it too since you’ll have all that extra current capacity.
FuglyDuck@lemmy.world 11 months ago
19 is probably fine. Voltage is always a bit inconsistent so the phrase they use is “nominal”- or “more or less”