Comment on Rude
BreadOven@lemmy.world 22 hours agoNo birds, but a dog and humans. I got a fairly inexpensive enclosure for mine. Even has a vent/fan if I want to exhaust it outside. I would recommend.
Comment on Rude
BreadOven@lemmy.world 22 hours agoNo birds, but a dog and humans. I got a fairly inexpensive enclosure for mine. Even has a vent/fan if I want to exhaust it outside. I would recommend.
Gormadt@lemmy.blahaj.zone 12 hours ago
As long as you’re venting it sufficiently you should be good
My setup can change the air in my apartment about 6 times per hour
But mine also runs double duty during the summer time (lease says no AC so it get HOT during the summer) to help cool it down after dark.
BreadOven@lemmy.world 1 hour ago
I’m just printing PLA and PETG so I don’t usually have the exhaust fan running. It’s also in a storage room in the basement, so no one is around it. But if I print other types I’ll definitely move it so it vents outside with the fan.
I haven’t had it long enough to print in the summer, but depending on humidity I may move it to the garage.