Comment on Need help with Creality Sprite Pro
KremlinJanitor@lemmy.world 1 year agoI run Klipper firmware on this printer not stock Marlin. I usually print PLA at 210 so the temperature cut off wasn’t the problem. I fully heated the nozzle before trying to extrude filament.
LemonPop@lemm.ee 1 year ago
Hmmm try connecting the extruder motor wire to another movement motor (x, y or z) and running the extrusion to see if the movement motor moves. You could also connect a movement motor wire to the extruder motor and see if it extruded then
KremlinJanitor@lemmy.world 1 year ago
So i think the gears might have been jammed something? Now the motor is turning perfectly fine in the correct plug. Must have just shipped that way from the factory i suppose. Thanks so much for the help!
LemonPop@lemm.ee 1 year ago
No worries. Glad you were able to solve it :)
KremlinJanitor@lemmy.world 1 year ago
Ok so i swapped the extruder connection to the Z stepper one and it did spin! So the motor’s not bad or the connection. Swapped it back to the extruder socket and nothing. So maybe its something in the Klipper config for the extruder?