Comment

Comment on issues setting up nginx as an https proxy

Don’t worry. Lemmy is asynchronous after all. Instant responses aren’t expected. Plus. I know life gets in the way :-).

It was basically a misconception I had about how the homelab router would route the connection

Basically with pihole set up. It routes servo.internal to 192.168.1.y, the IP of the homelab router. So when a machine from the inside of the homelab. On 10.0.0.*, connects to the server. It will refer to it via the 192.168.1.y IP of the router.

The misconception was that I thought all the traffic was going to bounce between the homelab router and the home router. Going through the horrendously slow LAN cable that connects them and crippling the bandwidth between 10.0.0.* machines and the server.

I wanted to setup another pihole server for inside of the homelab. So it would directly connect to the server on it’s 10.0.0.* address instead of the 192.168.1.y. And not go and bounce needlessly between the two routers.

But apparently the homelab router realizes he’s speaking to itself. And routes the data directly to the server. Without passing though the home router and the slower Ethernet. So the issue is nonexistent, and I can use one pihole instance with 192.168.1.y for the server without issue. (Thanks to darkan15 for explaining that).

While I do have my self-learned self-hosted knowledge, I’m not an IT guy, so I may be mistaken here and there.

I think most of us are in a similar situation. Hell. I weld for a living atm :-P.

However, I can give you a diagram on How it works on my setup right now and also gift you a nice ebook to help you setup your mini-CA for your lan :

The diagram would be useful. Considering that rn I’m losing my mind between man pages.

As for the book… I can’t accept. Just give me the name/ISBN and I’ll provide myself. Still. Thanks for the offer.

source

Sort:hotnew top

N0x0n@lemmy.ml ⁨4⁩ ⁨weeks⁩ ago
(Thanks to darkan15 for explaining that).

I have to look at his answer to have a better understanding :P

The diagram would be useful. Considering that rn I’m losing my mind between man pages.

I’m working on it right now :) I’m a bit overwhelmed with my own LAN setup, and trying to get some feedback from other users :P

As for the book… I can’t accept. Just give me the name/ISBN and I’ll provide myself. Still. Thanks for the offer.

Good. If you have the money to spare please pay for it otherwise you know the drill :) (Myself I’m not able to pay the author so it’s kinda hypocrite on my end… But doing some publicity is also some kind of help I guess?)

Demystifying Cryptography with OpenSSL 3 . 0 by Alexei Khlebnikov <packt>

ISBN: 978-1-80056-034-5

It’s very well written, even as a non-native it was easy to follow :). However, let me give you something along the road, something that will save you hours of looking around the web :) !

Part 5, Chapter 12: Running a mini-CA is the part you’re interested in and that’s the part I used to create my server certificates.

HOWEVER: When he generates the private keys, he uses the ED448 algorithm, which is not going to work for SSL certificates because not a single browser accepts them right now (same thing goes for Curve25519). Long story short, If you don’t want to depend on NIST curves (NSA) fall back to RSA in your homelab ! If you are interested in that story go to p123:

Brainpool curves are proposed by the Brainpool workgroup, a group of cryptographers that were dissatisfied with NIST curves because **NIST curves were not verifiably randomly generated, so they may have intentionally or accidentally weak security. **

Here is a working example for your certificates:

Book:

$ mkdir private $ chmod 0700 private $ openssl genpkey \     -algorithm ED448 \     -out private/root_keypair.pem

But should be:

$ mkdir private $ chmod 0700 private $ openssl genpkey \     -algorithm RSA \     -out private/root_keypair.pem

You have to use RSA or whatever curve you prefer but accepted by your browser for EVERY key you generate !

Other than that, it’s a great reading book :) And good study material for cryptography introduction !
source
- brokenlcd@feddit.it ⁨4⁩ ⁨weeks⁩ ago
  i’m not sure if it’s equivalent. but in the meantime i have cobbled up a series of commands from various forums to do the whole process, and i came up with the following openssl commands.
  
  openssl genrsa -out servorootCA.key 4096 openssl req -x509 -new -nodes -key servorootCA.key -sha256 -days 3650 -out servorootCA.pem openssl genrsa -out star.servo.internal.key 4096 openssl req -new -key star.servo.internal.key -out star.servo.internal.csr openssl x509 -req -in star.servo.internal.csr -CA servorootCA.pem -CAkey servorootCA.key -CAcreateserial -out star.servo.internal.crt -days 3650 -sha256 -extfile openssl.cnf -extensions v3_req
  
  with only the crt and key files on the server, while the rest is on a usb stick for keeping them out of the way.
  
  hopefully it’s the same. though i’ll still go through the book out of curiosity… and come to think of it. i do also need to setup calibre :-).
  
  thanks for everything. i’ll have to update the post with the full solution after i’m done, since it turned out to be a lot more messy than anticipated…
  
  source
  - N0x0n@lemmy.ml ⁨4⁩ ⁨weeks⁩ ago
    This is indeed similar ! And looks like a working certificate :) (You even use as .csr file).
    
    The book adds something (Not very useful but kinda neat to have): a certificate revocation setup and an IntermediateCA signed by your rootCA. So you can keep your rootCA out of your system :)
    
    source