I have an Ultimate 2 and I haven’t been able to figure out how to do that so I can’t remap the back buttons with Steam input.
What’s the trick?
Comment on 8BitDo Pro 3 Controller Announced with Swappable Buttons, Available for Preorder
NuXCOM_90Percent@lemmy.zip 2 days agoUltimate 2 is fully bindable in Steam (even gyro if you do directinput over bluetooth).
Valve gonna Valve but there isn’t a reason to assume a regression on that. But, like everything, don’t preorder things.
Toribor@corndog.social 1 day ago
NuXCOM_90Percent@lemmy.zip 1 day ago
- Update the firmware of the controller and dongle (technically the dongle isn’t necessary if you are using bluetooth). I did this in a VM because Linux
- Fully power down the controller. Switch to the connectivity mode you want
- Hold the Circle/B button and power on the controller to enable directinput mode
- Update Steam to the Beta branch
- Open Steam’s controller remapper
- Regardless of connectivity, you should have mappable L4/R4/BackPaddles. If you are using bluetooth you will also have the gyro
dualpad@lemmy.zip 1 day ago
Right now has to be the 8bitdo Ultimate 2 wireless. Not the bluetooth switch one. Need to update the dongle and controller to the latest beta firmware and launch it in dinput mode by turning it on while holding the B button. Then all the extra buttons can be mapped along with using gyro with analog triggers, which couldn’t be done before.
idogoodjob@lemmy.world 1 day ago
Is Dinput mode limited to Bluetooth only or can it be used on the 2.4ghz as well?
LiveLM@lemmy.zip 1 day ago
Ultimate 2 also does Gyro over the 2.4 dongle (At least in the Wireless version).
Update the firmware of the controller and the dongle and hold B when turning on.