Comment on Realized 99% of all my chargers are USB-C. This can only mean one thing. New USB bout to drop!
HugeNerd@lemmy.ca 3 days agodoes have a tendency to get a little dirty though
Dollar store keyboard cleaner air cans are good for this. There really should have been a little spring-loaded flap on the connector, like later SPDIF has.
rumba@lemmy.zip 3 days ago
A mechanical cover would have been good. Hell, even a rubber dust boot attached at one end would have been useful.
I keep a little deox-it around and use wooden toothpicks dipped in it. Pocket lint, and dust seem to collect on the left and the right on the ports and make them feel like they’re loose.
I had one the other week that was really bad I ended up digging it out with a dental pick. The phone had gotten wet and it was slowly making diy concrete down in there. But yeah much better to rely on air or not conductive tools, any to scratch off the protective plating
HugeNerd@lemmy.ca 3 days ago
When you look at the amount of people and corporations behind a spec like USB… and no one thought of this? I wonder if there are IP67 USB-C connectors?
rumba@lemmy.zip 3 days ago
I suspect it was give and take. Lightning was a very, very slim port, but didn’t have enough pins/shielding to do high speed. C has a boatload of pins, great shielding and picked up dual sided, but the hole needs to be thicker to do this.
Other than a rubber flap on the outside of the chassis, I can’t think of any way to protect it from the inside that wouldn’t either impede plugging in or wear out quickly.
There’s def some need there.
HugeNerd@lemmy.ca 3 days ago
Just picture a rectangular plunger plate with a hole in it that sits over the wafer inside the receptacle. Then when you plug in, the plunger is pushed back. Tiny springs push it back out.
I know just enough to know that something like this is more complex to engineer than you want… It’s awfully small, it needs to move freely even when crudded up, it needs to not impede plugging in, etc
Of course this won’t protect 100% from ingress, just reduce it.