Comment on My reason for wanting HomeAssistant and a locked down VLAN...
AnAustralianPhotographer@lemmy.world 3 weeks ago
And it probably needs to connect using WEP
Comment on My reason for wanting HomeAssistant and a locked down VLAN...
AnAustralianPhotographer@lemmy.world 3 weeks ago
And it probably needs to connect using WEP
WhyJiffie@sh.itjust.works 3 weeks ago
wpa2, but password limited to 10 characters. letters and numbers only, trying anything else crashes it, and you have to figure this out yourself
possiblylinux127@lemmy.zip 3 weeks ago
Nah, it will just broadcast a 2.4Ghz noise for no reason
Bytemeister@lemmy.world 3 weeks ago
I feel like it’s missing that nifty FCC sticker…
swampdownloader@lemmy.dbzer0.com 3 weeks ago
And you must enter password through a 2 character wide menu screen with only up and down arrows
hedgehog@ttrpg.network 3 weeks ago
The up arrow moves through the letters, e.g., A->B->C. The down arrow moves to the next character in the sequence, e.g., C->CA->CAA. If you click past the correct letter, you’ll have to click all the way through again. And if you submit the wrong letter, you have to start all over (after it takes twenty seconds attempting to connect with the wrong password and then alerts you that it didn’t work, of course).
smeenz@lemmy.nz 3 weeks ago
And each letter briefly increments to the next letter before being replaced by an asterisk.