Comment on Got klipper up and running on the new Ender-3 V3 se

MicrosoftSam@lemmy.world ⁨9⁩ ⁨months⁩ ago

• Calania@feddit.nu ⁨9⁩ ⁨months⁩ ago

  You should try to install octoprint on a raspberry pi. It’s the easiest way to get a web gui if you don’t want to mess with the firmware or mainboard

  source

  • LazaroFilm@lemmy.world ⁨9⁩ ⁨months⁩ ago

    Klipper is sooo much better than Octoprint. It replaced the whole software not just the web interface part. Klipper is absolutely amazing. Now for work, it’s an open source software with community support. So done corporate don’t like not having a company to blame if something goes wrong.

    source

    • mee@programming.dev ⁨9⁩ ⁨months⁩ ago

      Klipper isn’t a web interface. Octoprint works with Klipper as a web interface. They’re different software for different things.

      source

      • rambos@lemm.ee ⁨9⁩ ⁨months⁩ ago

        Yeah, get mainsailOS with klipper

        source

        • -> View More Comments
• hibbfd@kbin.social ⁨9⁩ ⁨months⁩ ago

  klipper is the firmware flashed to the printer

  gui is achieved and accessed through mainsail or octoprint. I haven't tried octoprint.

  mainsail runs on a raspberry pi and can manage multiple klipper printers with one device. you can also add klipperscreen, it's an addon that can be used with a touchscreen for an interface at the printer (or anywhere really)...

  but I just access mine running mainsail through my phone browser or the laptop I use to model and slice. I like orcaslicer because it integrates mainsail right into a tab in the slicer and provides a seamless user experience.

  source

  • MicrosoftSam@lemmy.world ⁨9⁩ ⁨months⁩ ago

    Awesome thanks for the info!

    source

    • hibbfd@kbin.social ⁨9⁩ ⁨months⁩ ago

      another thing to note... klipper firmware takes the heavy processing typically handled by the printer control board, and offloads the burden onto the computer or device you have hooked up to the printer, processing and feeding the gcode one line at a time. so whatever device you are using needs to be up to the specs. I'm using an rpi 3b+ and have no issues.

      source