hibbfd
@hibbfd@kbin.social
- Comment on PETG Print Issues 1 year ago:
typically the fan cooling the heatbreak and extruder stays on even with the "extruder" aka part cooler fan turned off
- Comment on Got klipper up and running on the new Ender-3 V3 se 1 year ago:
another thing to note... klipper firmware takes the heavy processing typically handled by the printer control board, and offloads the burden onto the computer or device you have hooked up to the printer, processing and feeding the gcode one line at a time. so whatever device you are using needs to be up to the specs. I'm using an rpi 3b+ and have no issues.
- Comment on My carryonable 3d printer 1 year ago:
this project is awesome. thanks for sharing. now I want one
- Comment on Got klipper up and running on the new Ender-3 V3 se 1 year ago:
klipper is the firmware flashed to the printer
gui is achieved and accessed through mainsail or octoprint. I haven't tried octoprint.
mainsail runs on a raspberry pi and can manage multiple klipper printers with one device. you can also add klipperscreen, it's an addon that can be used with a touchscreen for an interface at the printer (or anywhere really)...
but I just access mine running mainsail through my phone browser or the laptop I use to model and slice. I like orcaslicer because it integrates mainsail right into a tab in the slicer and provides a seamless user experience.
- Comment on Got klipper up and running on the new Ender-3 V3 se 1 year ago:
even better, add [screws_tilt_adjust] to take advantage of the crtouch and a little fancy computer math to make leveling super easy.
https://www.klipper3d.org/Manual_Level.html
ender beds use M4 screws
- Comment on The flying car completes first ever inter-city flight (Official Video) 1 year ago:
maybe they are talking about the helicopters you can drive around in too. they don't have big rotors on top, just basically a little fan in the front to cool the radiator when not in flight mode.
oh wait I'm thinking of a car