Comment on My First Homelab
Thorry84@feddit.nl 10 months ago
Just so you know, operating spinning drives this way is a bad idea. If the platters are spinning and the drive tips over, the rotation of the drives resists the movement. This gyroscopic force is enough for the platters to touch the heads which are flying a tiny distance above the platter. Obviously this is a bad thing and will damage the drives.
A quick fix is to just lay them flat or fix both of them together so they have a more stable base to stand on. Putting it in an enclosure is even better.
Thanks this is a very temporary solution until I can 3D print a better solution or buy an better temporary solution.
It's pretty stable I have a make shift stand, and I'd have to bump them pretty hard for them to fall over. If I shake the table hard they definitely won't fall
You gotta embrace the jank! Also, he’s got them in some kind of stand. That looks reasonably stable to me.
I love my janky temporarily solution.
I made a stand of old ikea plastic parts I had laying around, screwed them together and have both drives supported from both sides and connected together.
If I directly bump the drive hard enough they'd fall, but I'm pretty confident I can shake the table really hard and they'll be fine.
I'm hoping to get a 3D printer to make a more permanent solution
Nooooo! Don’t shake the table!
lol I won't those HDD's are like my babies, I'm very careful with them, that stand while not foolproof is solid, but I have no plans of testing it out now that the drives are in there
Thanks for the feedback! I am doing the opposite right now funnily enough. Trying to move away from having everything on Truenas as an app because of the host-app communication limitations. I have a bridge network set up but it still has its issues.
I’ll need to get some hardware to make this happen. At least to have a PCIe SATA controller I can pass through to a TrueNas VM so I can have everything on one physical host.
Nextcloud is on the list to try. For now syncthing was fixed up for filesync from my shoddy implementation of it yeras ago.
I have recently moved adguard and home assistant to raspberry pi, same reason, though the hass I have moved into docker container with host network in the end. I also installed tailscale directly to have easy setup as an exit node.
Nice good luck!!
I think I'm going to keep NextcloudAIO as is, not having everything in one place feels better and safer.
ashaman2007@lemm.ee 10 months ago
Yeah knocking them over while active would probably not be the best, you can even hear the stress on the spindle bearings if you rotate a running hard drive. However you should be free to mount them (securely) in almost any orientation given the discussion in this old post: www.silentpcreview.com/forums/viewtopic.php?t=215…